How to Perform a Power Reset on My Acer Laptop?
The following steps will address you to perform a power reset on your Acer laptop. Don’t worry about the saved data, it will not be removed or reformatted when performing power reset
Follow the given step-by-step instructions:
- Remove the AC adapter connected to your Acer notebook.
- Turn back the laptop to remove the battery. You will find two tabs i.e.
lock - Now, turn the laptop back over and proceed to the next step.
- Thereafter, press and hold down the power button for 30 seconds and then release the power button.
- Now, reinstall the battery to its place in the laptop.
- Moving ahead with the procedure, slide the lock tab back into the lock position.
- Repeat the process one last time to turn over the laptop and plug in the AC adapter.
- Finally, turn it on. You’re done now!
Isn’t the method too easy? You can do this within minutes. To check more question and answers related to Acer laptop, visit our website where you can gain more knowledge about troubleshooting basic issues relate the administration can benefit sitting at home. Dial our sans toll number for the better arrangement.
How to fix Acer Laptop Display Problem?
Have you ever experienced, when you turn on your laptop then a little loading circle underneath is popped up then one beep then screen becomes black like it is in sleeping mode then nothing!! You don’t have choice but to remove and reinsert battery. Some time you might have faced this sort of issue if you are a long time user of Acer Laptop. Some of the issue in Acer laptop like screens fading, becoming hard to see, color problem can be solved by changing the color setting and adjusting brightness level. But there is another problem like display freezing or appearing jumpy is resolved by updating the display driver.
So here Acer Support Australia provides you a complete solution by which you can readily accomplish this task. Go ahead and follow these steps, discussed below.
- To brighten the screen, Press and hold “Fn” key tap to the right arrow key, tap left for darken.
- Save you brightness setting.
- Now go to the laptop screen, right click on it and go to the “Graphics properties”.
- Go to “drop-down menu”, choose the resolution setting, and adjust the display resolution by
- clicking on display setting.
- Check your resolution setting by clicking “apply” and click “ok” to save the setting.
- Move to the brightness or contrast slider to the right or left, click on “color correction”
- adjust it, and click on “ok” to save the setting.
- Now click “ok” to exit.
- Again go to the laptop screen, right click on it, and go to the “personalize” display setting and
- “advance setting”.
- Click on the “Intel Graphics” tab and choose “monitor properties” click on “Drivers”.
- Click on “update drivers” and select “search automatically”.
- Install all the updated monitor driver and click “OK” to restart the system.
You are done with this task, but if you are still unable to fix your problem. You should try this method too;
- Close all programs, turn off your laptop, wait for 30 second.
- You need an external monitor, connect it to the laptop.
- Turn on the external monitor and laptop.
- Press f4 button for the external monitor to work, if it needs.
Our experts tried to solve this problem by all means. But if you see the same problem on your external monitor then there might be a problem in your graphics/GPU or in your mother board. For more information it is always better to get in touch with the experts. So feel free to contact our highly experienced experts via Acer Technical Support NZ Helpline Number 099509154. They will not only help you in this case but also provide you a well-described solution in some other similar issue.
How to fix Hanging issue in Acer Laptop?
There are millions of Acer laptop users around the world and a maximum part of the population is fully dependent on computers nowadays. Many times while using a computer, users come across hanging issue and it’s a very common issue that crops up anytime. Today, in this blog, we are going to explain you the steps to avoid this situation in future. Acer support team is also available to offer you directions to resolve this issue.
Directions to follow:
If you are playing a game or your browser has stopped responding then follow these given steps to fix hanging situation.
- Whenever your PC is hanging, press CTRL + Delete key together on your keyboard.
- Once you do so, a new window will open where you can see many options, go to an option “Task Manager”.
- Once you open Task Manager, you’ll be able to see a new window on your screen.
- In this window, you’ll be able to see a program that is not responding or working properly. Next, you have to press on “End Task” after selecting that program.
In this way, you are able to fix the hanging problem while playing or doing some other work on your laptop.
Directions to avoid hanging issue on your computer screen: - Always try to refresh your system time to time.
- You should erase your browser history time to time as it stores a lot of junk data.
- Try to restart your computer on average period of 4 hours.
- Delete the cookies and temp files time to time from your browser.
These are some simple steps that you need to follow in your daily routine when you make use of your computer on a regular basis.
In case, you find yourself in the same scenario and these given steps are not working effectively then contact Acer Customer Support New Zealand 048879119 team for an immediate support. Experts take your desktop on their screen and fix the issue instantly.
Original Source
How To Solve Acer Computer’s Monitor Issues?
Acer is the largest developer of PCs, laptops, tablets, smartphones, displays, storage devices, virtual reality devices, servers, and peripherals. It also has marketing in gaming PCs by gradually shifting from a manufacturer to a designer, marketer, and distributor of products. It even has the business entity, whose main target is to focus on the integration of cloud services, brings development in smartphones and wearable devices having value added applications. Beginning with only eleven employees, it became the sixth largest vendor of a computer all over the world by grouping themselves in five parts i.e. international sertek, semiconductor, information products and the last one is peripherals group.
Sometimes we face a problem in our monitor though it is rare to occur. For solving this issue, you can either approach Acer Support or go through the points given in the next lines:
- It could be due to the faulty VGA cable or it is not connected correctly. It is connected to several pins, may be one has been bent.
- A dim screen can also irritate you that mostly occur because of failure in CCFL bulbs. You will find the image appearing on the screen is of reddish hued color.
- The main reason of the failure in CCFL bulbs is they are aging faster than other computer components. You will see a reddish image after turning on and it may or may not return to its normal color.
- Many times it doesn’t begin because of the problem in graphics card. You can easily checkout this with the help of Systematic Fault Isolation.
- The cut and distorted images can annoy the person which occurs due to the resolution set on the computers is not the one supported by the monitor. Set the display setting to the maximum.
- You can find the display resolution on the internet using the model number. Sometimes, it can show you a warning, so, take care of that.
Was the information given meaningful? In case, not, you have to just ring at Acer Support Number Nz 048879119 to resolve the issue related to a monitor. Feel free to call and flush out the problem by getting the suitable measures.
Original Source
How To Boot Acer Laptop To Safe Mode
Whenever any virus attacks your computer or laptop, the safe mode on your computer allows you to remove the virus or reinstall the system components. The safe mode disables the network and allows only limited number of drivers to run. It is well known for the removal of various malicious programs that often re-install using a network connection.
In this article, Acer Nz helpline has provided you the procedure to boot your Acer laptop into safe mode. All you have to do is go through this procedure step-by-step and you will be able to resolve the problem.
Step 1- Firstly, go to the start menu, where you will find a "Restart" option, click on it and restart your laptop.
Step 2- Now before you get to see the windows logo, press the F8 key repeatedly that will take you to the Windows Advanced Options (Windows XP) or Advanced Boot Options (Windows Vista and 7).
Step 3- At last scroll down the menu and highlight "Safe Mode." Now to launch the windows in the safe mode, press enter. You will be asked for your administrator password, but the windows will automatically launch into the safe mode if there is no administrator password set by you.
In this way, you will be able to boot your laptop to safe mode. If any issue occurs while following the steps, you can contact the Acer customer support New Zealand +64-48879119. Their technical staff has the capabilities to resolve any type of issue related to the Acer laptop. So, if you have any issue related to your Acer laptop whether it is related to blank screen issue or wireless connectivity issue or any other type of problem, the tech support team of Acer will help you to get through these issues without wasting your time.
Steps To Turn On A Wireless Connection On Acer Laptop
Wireless connectivity allows you to connect multiple computers or laptops online without using the cables or cords. To connect multiple laptops, you need a router/modem and an Internet Service Provider. Now, most of the Acer devices already have inbuilt wireless, so no additional hardware is required for connection. Connecting your devices to a wireless connection is not a complicated process but you still need proper guidance so that you connect without any issues. In this article, Acer laptop support has mentioned some steps for you to complete the process without any trouble.
1. Turn on your device. Move the switch located on the front of the laptop to the right-hand side and then release it. The switch will go back to its original position.
2. Make sure that the networking icon has appeared on the screen.
3. Now, in the bottom right corner of the screen, right-click on the icon which looks like a small stair-step triangle in Windows 7 and looks like a tiny monitor in Vista operating system.
4. Click 'View available wireless networks' or 'Open network and sharing center' depending upon the version of your operating system.
5. Now, wait until the adapter finds the Wi-Fi network. Select the network and click 'Connect'.
6. Enter the password which you created while setting up the router. If you do not know or forget the password, login into the gateway page mentioned in the user's guide. Locate the 'Wireless security' settings page to see that the security is enabled. If it is enabled, type in a new key and enter the same number for the Wi-Fi network. If you are not able to search any network on your laptop, you can take the help from Acer tech support number to resolve the issues.
Related Keyword :
How do I disconnect wifi on my laptop?
How do I turn on wireless on an Acer laptop Windows 8?
How do I connect to wifi on my Acer laptop?
How do I disconnect my WIFI?
How do I turn on the Wifi on my Acer Aspire One laptop?
Related Blog : Professional Acer Customer Support New Zealand Is the Need of the Hour
